First, the product characteristics
    1, Appearance: uniform emulsion;
    2, color: white;
    3, the active ingredient: 20% ± 2
    4, PH value :7-9;
Second, the product performance
    1, excellent mold release, mold and keep the edges smooth intact
    2, for concrete mold with water,
    3, there is a certain resistance to rain erosion resistance,
    4, there is some rust on the steel protective effect,
    6, the steam curing adaptability, 90 ℃ steam curing temperature does not affect the stripping effect,
    7, stable performance, long-term storage, if hierarchical, stir well before use does not affect the results,
    8, the product non-toxic, odorless, does not affect human health.
Third, the main purpose
    1, for concrete pole, cement pipes, piles and other steam-cured products, components and in-situ concrete stripping of steel, wood mold, mold particle board, concrete tire mold and other mold have better applicability.
    2 for general pressure pipe stripping, you can also reduce the risk of tearing the rubber sleeve.
The use of methods and precautions
    1, remove the template before brushing the surface of the adhesive material, direct spray or brush on the template, the coating should be thin and uniform (twice is appropriate), to be dried immediately after pouring concrete.
   2, the model for the new wood or concrete tire mold (surface roughness somewhat less), for the first time the FDA, it is best to its weight of 10% talc, stir and then brushing.
   3, product storage period, if a little stratification, you can use a little stir, does not affect the stripping effect.