The main ingredient of ZY-313 is modified mineral oil. When using, spray or paint the diluted product over the surface of the mould directly and it would generate a compact isolated layer to ensure the concrete achieving artistic and flawless.
 

With good water solubility and less surface tension, ZY-313 endues the concrete with the best quality. In addition, ZY-313 can meet the requirements of environmental protection in the future.
 

The product is suitable for cast-in-place concrete, prefabricated parts, cement products and those with high requirements on its surface outlook.
 

Typical analysis:
Main ingredient: modified mineral oil
Appearance (20 ° C): clear liquid, pale yellow to brown
Solid content (%): 98±1.5
PH（20°C）：6.0～7.5
Viscosity (mPa.s): 150 ~ 350
Chloride content (%): 0
Alkali content (Na2O): 0
Recommendations of additive volume: diluted within the range of release agent: water =1:9~15 dilution. The optimum dosage could be adjusted according to the design performance. The diluted product shows milky white.
 

After dilution, the product will appear delamination in a certain period, but it has no influence on the effect of the product after stirring well.
 

Storage：
Prevent the erosion caused by climate. The storage temperature should be between 5°C ~ 40°C.
Keep away from fire.
Under normal storage conditions, the product should be used within twelve months after the delivery.
 

ZY-313 is non-dangerous goods, but inedible. Avoid contact with skin and eyes when using. If swallowed by mistake, immediately sent to hospital for treatment. If spilled, absorb the spills with the sand, soil or other inert materials, carry them away by suitable containers, and flush out the residue with plenty of water. The disused and expired product should be disposed in accordance with the local Waste Disposal Ordinance.