1, open the power switch, the red light that is connected to the power.
In 2, the two toggle switches are respectively arranged on" automatic" and" off" position.
In 3, stirring the pot and a stirring vane rub with a damp cloth, the water into a mixing pot, then in5 to10 seconds to put 500 grams of cement by adding water, stirring pot in blender pot seat, to the mixing location, press the start button to complete the speed controller is120 seconds -- stop 15 seconds ( blade and the pot wall slurry scraping into the intermediate ) - fast120 seconds - stop.
In 4, a handle so that the mixing pan down, turn counterclockwise stirring the pot to the release position, remove the stirring the pot.
5, each time you use immediately after complete removal of mixing blade and the stirring the pot and the residual slurry.